Description:
Kverneland 732FT – 7100TBX:
– Many added color configurations.
– Added rear hitch configurations and a rear PTO to the 7100TBX for towing trailers or implements behind the mower.
– Max working speed 18 mph (29 km/h).
– working widths – 3.18 and 10.2 meters.
– Costs:
732FT – $21,000 (estimated slot usage: 8)
7100TBX – $55,000 (estimated slot usage: 13)
Kuhn SW4014 Bale Wrapper:
– Added rear hitch configurations to tow trailers or implements behind the wrapper.
– Added ability to change between auto dropping and manual dropping wrapped bales.
– Added ability to wrap all bale sizes including all types of bales from the FS22_selectableBaleCapacity mod.
– Lots of additional wrap colors added.
– Many different color configurations.
Kubota TE6060 Tedder:
– Working width – 4.4 meters.
– Many different color configurations.
– Max working speed – 18mph (29kph).
– Cost: $7,000
– Added rear hitch configurations to tow trailers or implements behind the tedder.
Kubota RA2076 Windrower:
– Added rear hitch configurations to tow trailers or implements behind the windrower.
– Many different color configurations.
– Max working speed – 18mph (29kph)
– working width – 8.4 meters
– Cost: $19,500
Poettinger Impress 185VC Pro standard and liftable bales:
– Extra wide 4 meter pickup.
– Side doors open and close.
– Silage additive tank available as an extra configuration.
– Rear hitch option for towing trailers to load bales at the same time they are created all in one step saving time.
– Automatically dropping bales can be toggled on and off.
– Color selectable Body, frame, and trim.
– LED strobe lights.
– Can create and wrap bales from 1.25 to 1.80 meters.
CaseIH LB 436 HD standard and liftable bales:
– Rear hitch option for towing trailers to load the bales at the same time they are created all in one step saving time.
– Color selectable Body, frame, and trim.
– LED strobe lights.
– Can create all bale sizes including support for all types of bales from the FS22_selectableBaleCapacity mod.
_________________________________________________
Changelog 1.1.0.2:
– Added ability to make 9x capacity bales to all of the balers.
– Added many more color choices.
_________________________________________________
Changelog 1.1.0.1:
– Fixed issue with the balers where the wheelchocks were always visible in their storage place even when the balers were not connected to a vehicle.
– Fixed the issue that the liftable CaseIH baler would not make liftable bales and adjusted weights of the liftable bales.
– Added additional work modes to the Kverneland 7100TBX to allow the rear 3-Point hitch to be raised or lowered with the different work modes.
– Replaced Claas balers with the Poettinger Impress 185VC Pro. (Details above in the description.)
– Added a 4 meter pickup to the CaseIH LB 436 HD.
– Added configurable strobes and extra colors to the balers.
_________________________________________________
Changelog 1.0.0.1:
– Fixed the issue that the CaseIH LB 436 Liftable baler would not unfold the rear hitch.
– Added silage additive tank configuration to all balers.
Credits:
Macktrucker921
Direct Download Links
